CO certification Vakmanschap CO monitored Sign-off without manual work

Custom Gas Boiler Act software

Since 1 April 2023, only certified companies may work on central heating boilers, geysers, gas fires, gas cookers and flue systems. In everyday speech this rule is known as the Gas Boiler Act (Gasketelwet). To comply, an installation company must be able to demonstrate that its engineers, measurements, commissioning and notifications are in order. Appfront builds custom software that keeps track of all of this, connected to your scheduling and job sheets.

What is Gas Boiler Act software?

Gas Boiler Act software helps an installation company demonstrate that it works in line with the rules for CO certification. Since 1 April 2023, only certified companies may carry out work on gas combustion installations, such as central heating boilers, geysers, gas fires, gas cookers and flue systems. The legal basis is the Besluit bouwwerken leefomgeving (Building and Living Environment Decree). There are three certification schemes: BRL K25000 from Kiwa, mainly for freelancers and smaller companies, BRL 6000-25 from InstallQ, and NHK 2021, for gas fires and stoves only. Certified companies are listed in the public Register of gas combustion installations of the Toelatingsorganisatie Kwaliteitsborging Bouw (the Dutch building quality assurance admission body), on CO-VRIJregister.nl, and use the CO-VRIJ logo.

For the company, that means records that are right every single day. Every engineer who commissions an appliance must hold a valid Vakmanschap CO personal certificate; without that proof, they may not commission anything, not even under supervision. Until the Centraal Register Techniek (central register of technical qualifications) is ready, the company keeps track of that competence itself in the personnel file. Measuring equipment for CO, oxygen and flue gas temperature must comply with NEN-EN 50379-2. And work must be signed off with the certification body: under BRL K25000 via the Kiwa CO Preventie app, under BRL 6000-25 automatically in line with article 6.1, for which an API is available. The certification body assesses projects unannounced, remotely or on site.

We build custom software because these rules run through the whole company: from personnel file to scheduling, job sheet and measuring device. The software monitors each engineer's personal certificate and warns you before it expires. When scheduling, a commissioning job can only be assigned to an authorised engineer. On the job sheet, the engineer records measurements and findings, and the software signs off the work via the route of your certification body. A dangerous situation is escalated immediately. That way, when an audit comes, the file is ready, rather than having to be pieced together from folders and mailboxes.

Authorised

Certified engineers only.

Off-hired

No double entry.

Audit-ready

A file per job.

How we build your Gas Boiler Act software

We start with your company and your scheme: BRL K25000, BRL 6000-25 or NHK, how many engineers, which scheduling and job sheet software you use and how you currently sign off work. Then we first build the register of engineers and certificates and the integration with your scheduling, and have your planners and quality manager review it. The job sheet, measurements, sign-off and audit file follow after that. If the rules or the scheme change, we adapt the software.

1
Scheme and way of working

BRL, engineers, systems.

2
Engineers and certificates

Register and scheduling.

3
Job sheet and sign-off

Tested with real jobs.

4
Go-live and maintenance

Go-live and maintenance when rules change.

What software for the Gasketelwet (Dutch gas boiler act) actually does

The components below appear in almost every Gasketelwet solution. Which ones you need depends on your certification scheme and the software you already use.

Personal certificates

CO competence certificate per engineer.

Planning

Only authorised engineers.

Job sheet and measurements

Findings per appliance.

Deregistration

Via your certification body's route.

Measuring equipment

In line with NEN-EN 50379-2.

Audit file

Ready for each job.

Who we build Gasketelwet software for

The software is intended for companies that regularly work on gas combustion installations and want to keep their certification demonstrably in order.

Installation companies

Multiple engineers.

Housing associations

In-house maintenance team.

Maintenance companies

Many commissionings.

Freelance installers

Hassle-free deregistration.

Not sure about a large project yet?

Test your idea first: a working prototype in 1 day

With OneDayBuild, we make your idea tangible in a single day for €1,150, so you know whether further development is worth the investment. Decide to go ahead with the full build? Then we deduct the cost in full.

View OneDayBuild →

Technology and integrations

This page is about the administration required under the Gasketelwet. For running an installation company in general, there is custom installer software, and for job sheets the job sheet app. We monitor other certificates and inspections with certificate management for KOMO and BRL files and maintenance software.

BRL K25000 BRL 6000-25 NHK 2021 Kiwa CO Prevention app Deregistration API Planning and job sheet Personnel file NEN-EN 50379-2 Roles and permissions Log

Why Appfront for your Gasketelwet software?

A commissioning carried out by an engineer whose certificate has just expired, or work that has not been deregistered, is an immediate finding in an audit. And with carbon monoxide, safety is at stake. We build on that: the rule is part of the planning itself, and deregistration happens straight from the job sheet.

Secure

Only authorised engineers.

Demonstrable

Every job in the file.

Less manual work

Deregister from the job sheet.

Security and privacy for Gasketelwet software

The software contains data on engineers, customers and homes, including addresses and findings about their installations. Only the data the certification body asks for is sent to it. Retention periods follow your scheme and the GDPR.

The software runs in a European data centre, with encrypted connections and storage. Keys for the deregistration route are kept shielded. Every change to the register of engineers and every deregistration is logged with time and user, and we agree with you in advance who may change what.

Frequently asked questions about Gasketelwet software

Questions installation companies ask about the Gasketelwet and software.

The common name for the rule that, since 1 April 2023, only certified companies may work on gas combustion installations such as central heating boilers, geysers, gas fires, gas cookers and flue ducts. The legal basis is in the Besluit bouwwerken leefomgeving (Dutch Buildings and Living Environment Decree).

BRL K25000 from Kiwa, BRL 6000-25 from InstallQ and NHK 2021, which only applies to gas fires and stoves. Which scheme suits you depends on the size of your company and the certificates you already hold.

The personal certificate that every engineer needs to commission a gas appliance. Without that proof, an engineer may not commission appliances, not even under supervision. The software monitors per engineer whether the certificate is valid.

Yes, via the route of your certification body. Under BRL 6000-25, automatic deregistration is mandatory and there is an API; under BRL K25000, deregistration runs through the Kiwa CO Prevention app. We agree exactly how the integration works for each scheme.

In the public Register of gas combustion installations of the Toelatingsorganisatie Kwaliteitsborging Bouw, at CO-VRIJregister.nl. Only companies in that register may carry out the work.

For companies with multiple engineers and many commissionings, or with their own planning and job sheet software that needs to connect. If you work alone, the tools from your certification body are often enough.

Is your CO certification demonstrably in order?

Tell us which scheme you follow, how many engineers you have and how you plan. We'll show you how custom software can tie certificates, work orders and sign-offs together.

Edit content