Always the current revision on your phone Printed drawing scanned and checked Comments with a photo on the drawing

Custom app for drawing revisions on the construction site

Appfront builds apps that let site managers, subcontractors and supervisors on the construction site always see the current revision of a drawing. A QR code on the printed drawing shows whether it is still valid. Comments and questions go back to the architectural firm with a photo and the location on the drawing. We describe the register and the distribution at the office on the software page; this page is about the app for the construction site.

What is an app for drawing revisions on the construction site?

During construction, an architectural firm regularly issues new revisions of drawings. At the office, the register shows which revision is current. On the construction site, a printed drawing hangs in the site cabin, and it may already be two revisions out of date. A subcontractor works from a PDF in an email from last month. This means building takes place according to a drawing that is no longer valid, and that only becomes clear when something goes wrong.

The register and the distribution at the office solve half of the problem. The other half is the construction site: at the moment it matters, the site manager must be able to see whether the drawing in their hand is still valid, and what has changed in the new revision. And when a question about a detail comes up on site, it should reach the firm with a photo and the location on the drawing, not in a phone call that nobody records.

We build custom software because the app has to fit your firm and your projects: which drawing register you use, how revisions are issued, who works with drawings on the construction site, and how questions are currently handled. The app works on the phones and tablets of site managers and subcontractors, even without coverage in a basement or on a floor with no network.

Current revision on your phone

Per project, the drawings with always the current revision, and a notification when there is a new revision.

Print checked

A QR code on the printed drawing shows whether it is still valid, or whether a newer one exists.

Questions with photo and location

Comments and questions with a photo and the location on the drawing, sent back to the firm.

How we build your app for drawing revisions on the construction site

We start with one project: which drawings, how revisions are issued, who works with them on the construction site, and where things go wrong.

1
Mapping projects and users

Your drawing register, distribution, and who works with drawings on the construction site.

2
Drawings in the app

Per project the current revision, with a notification and what has changed.

3
Prints and questions

QR code on prints, and comments with a photo and location on the drawing.

4
Integration and maintenance

Integration with the register, working without coverage, and then maintenance.

What an app for drawing revisions on the construction site actually does

The features below appear at almost every firm with projects under construction. Which ones you need depends on how you work.

Drawings

Per project, the drawings with the current revision.

New revision

A notification showing what has changed in the new revision.

QR on the print

Scan to check whether a printed drawing is still valid.

Comments

Questions with a photo and the location on the drawing.

Receipt

Confirmation per site manager or subcontractor.

Without reception

Drawings available without a network connection.

Who we build a drawing revision app for on the building site

The app is meant for practices and builders who want the building site to work with the right revision.

Architecture firms

Many revisions during construction. The current revision is the core.

Contractors

Site managers working on multiple projects. Notifications on revisions matter most.

Subcontractors

Work based on other people's drawings. What you need is a check on prints.

Supervisors

Supervision of the execution. Comments with photos are the core.

Not sure about a large project yet?

Test your idea first: a working prototype in 1 day

With OneDayBuild, we make your idea tangible in a single day for €1,150, so you know whether further development is worth the investment. Decide to go ahead with the full build? Then we deduct the cost in full.

View OneDayBuild →

Technology and integrations

This page is about the app for drawing revisions on the building site. For the register and issuing in the office, see our page on drawing revision management for architects, for the practice in general our page on software for architecture practices, and for the execution our page on a contractor app. You can read about our approach on custom software development.

If you manufacture to customer drawings and need the customer to approve the correct revision, there is our digital dossier app for customer drawings.

Drawings per project Current revision Revision notifications What has changed QR code on prints Comments with photo Location on the drawing Confirmation of receipt Working without coverage Integration with the register

Why Appfront for your drawing revision app for the building site?

A wall built to an old revision has to come down. That is what we build on: the current revision where the building happens, prints you can check, and questions that reach the practice with a photo.

The right revision

The building site sees what applies in the office.

No outdated prints

A scan tells you whether the print is still valid.

Questions recorded

With photo and location, not in a phone call.

Security and privacy for a drawing revision app on the building site

The app contains drawings of projects, often confidential to the client and the practice. Access is set up per project and per role: a subcontractor only sees the drawings for their own work.

The app runs in a European data centre, with encrypted storage and daily backups. Drawings are available on the device without coverage, and are updated as soon as there is a connection.

Frequently asked questions about a drawing revision app for the building site

Questions that architecture practices and contractors ask before they get started.

It shows the drawings per project with always the current revision, notifies you of new revisions along with what has changed, lets you use a QR code to check whether a print is still valid, and sends comments with a photo and location on the drawing to the practice.

That software is for the office: the register, the revisions, issuing and comparison. This app is for the building site: seeing the current revision, checking prints and asking questions. They work together with the same register.

Every printed drawing carries a QR code. Whoever scans it sees whether that revision is still valid, or whether there is a newer one, along with what has changed.

Yes. The project's drawings are stored on the device, and comments are sent as soon as there is a connection.

Yes, with access to the drawings for their own work. They confirm receipt of a new revision, so the practice knows who has seen it.

Yes, if that register has an interface. A new revision in the register appears in the app straight away, and comments from the building site come back to the drawing.

Check that first. There are platforms for construction documents, and they are enough if the whole project runs on them. Custom makes sense if your firm has its own register and the building site wants to connect to it.

The building site always on the right revision?

Tell us which drawing register you use, how revisions are issued and who works with drawings on the building site. We will show you what the app looks like.

Edit content