Custom RIS integration for inland shipping
River Information Services, or RIS for short, are the European information services for inland shipping: electronic reporting, vessel positions via AIS, notices to skippers and fairway information. In the Netherlands, a skipper reports voyage and cargo data to Rijkswaterstaat and the port authorities via BICS. Appfront builds the integration that connects your own planning, stowage or fleet software to those services, so data is entered once and ends up in the right place.
What is a RIS integration for inland shipping?
A RIS integration connects your own systems to the information services for inland shipping. The European basis is Directive 2005/44/EC on harmonised River Information Services, amended by Directive (EU) 2025/2482. That amendment focuses RIS on the inland waterways and inland ports of the trans-European transport network with a cross-border connection, and has the member states jointly set up a European RIS environment as a central platform for RIS information, with links to the systems of other modes of transport and inland ports. Member states must be able to receive electronic reports from vessels and provide notices to skippers in a standardised, downloadable form. The directive must be transposed by 2 January 2029 at the latest.
In the Netherlands, electronic reporting runs via BICS, the Rijkswaterstaat application that skippers use to report voyage and cargo data to the waterway manager and port authorities. Since 1 December 2021, the electronic reporting obligation has applied to all vessels covered by Article 12.01 of the Rhine Navigation Police Regulations; container vessels and tankers were already required to report before that. BICS works with fixed lists for loading and unloading locations, cargo types and dangerous goods, and, according to Rijkswaterstaat, has a standardised interface that lets other software, such as shippers' stowage programs, pass on data. In addition, every vessel with AIS transmits its position, speed and voyage data; on waters where the Inland Waterways Police Regulations apply, AIS has been mandatory since 2016 for commercial vessels of CEMT class I and above.
We build this as a custom solution because the data for a notification is usually already held elsewhere: the cargo in the stowage plan or order file, the voyage in the planning system, the vessel in fleet management. The integration converts that data to the fixed lists and codes, checks it before the notification is sent, for example for dangerous goods and loading and unloading locations, and prepares it for BICS via the interface Rijkswaterstaat provides for this. In the other direction, it feeds AIS positions and notices to skippers into your own planning. We agree with you, and where necessary with the Bureau Telematica Binnenvaart, which role you have in the chain and which connection suits it.
Enter once
From planning and stowage.
Checked
Lists and codes up front.
In view
Positions and messages added.
How we build your RIS integration for inland shipping
We start with your role and your data: do you sail yourself, plan for a fleet or supply cargo, where do voyage, cargo and vessel data currently sit, and who files the notifications with BICS. Then we define which notification fields come from which system and how they are translated to the fixed lists. We first build the preparation of notifications for one vessel or one type of cargo and have the skipper or planner review it. AIS positions, notices to skippers and more vessels follow once that works well. After that, we maintain the integration whenever BICS, the reporting obligation or the European specifications change.
Sailing, fleet or cargo.
Fields to fixed lists.
Reviewed by the skipper.
Go-live, monitoring, and maintenance when rules change.
What a RIS integration for inland shipping actually does
The components below appear in almost every RIS integration. Which ones you need depends on your role in the chain and on the systems where your data currently sits.
Report
Voyage and cargo prepared.
Code lists
Locations and cargo types.
Dangerous goods
Checked in advance.
AIS
Positions in your planning.
Messages
Notices to skippers processed.
Log
Every notification traceable.
Who we build a RIS integration for inland shipping for
The integration is intended for inland shipping companies that currently enter voyage and cargo data in several places, or that look up positions and waterway information manually for their planning. The more vessels and voyages you have, the more it delivers.
Shipping companies
Notifications for the whole fleet.
Shippers
Stowage carried through to the notification.
Terminals
Arrivals in view.
Software builders
RIS in your software suite.
Technology and integrations
This page is about River Information Services in inland shipping. If you are looking for software for a radiology information system, which is also abbreviated to RIS, see our page on RIS software for radiology. For waiting hours and demurrage per voyage there is voyage report software for inland shipping, and for port call notifications and waste disposal in the port there is the port call notification and waste disposal system. Electronic freight information runs via the eFTI integration. You can read about our approach on building custom software.
Why Appfront for your RIS integration for inland shipping?
Cargo that is typed in three times, a notification that fails on an unknown unloading location, or a planner who pulls vessel positions from separate apps all cost time on board and in the office. That is what we build on: data that is entered once, checks before the notification is sent and a log in which you can see what has been reported.
Once
No double entry.
Checked
Errors caught before notification.
Traceable
Every notification recorded.
Security and privacy in a RIS integration for inland shipping
The integration processes voyage, cargo and position data, which can be commercially sensitive. According to Rijkswaterstaat, data sent via BICS is available only to Rijkswaterstaat and port authorities. The integration follows that principle: it shares data only with the parties you designate. Data about skippers and crew is personal data, so the GDPR applies; the directive also says so for names and location data that can be traced back to a person.
The integration runs in a European data centre, with encrypted connections and storage. Accounts and keys for BICS and other services are kept secure and are not visible to staff. We agree with you in advance who may prepare notifications, who may send them and who may see the positions of which vessels.
Frequently asked questions about a RIS integration for inland shipping
Questions that shipping companies, shippers and software suppliers in inland shipping ask before they get started.
The harmonised information services for inland shipping in the European Union, such as electronic reporting of vessels, notices to skippers, fairway information and vessel positions via AIS. The basis is Directive 2005/44/EC, amended by Directive (EU) 2025/2482.
The Inland Shipping Information and Communication System (Binnenvaart Informatie en Communicatie Systeem) of Rijkswaterstaat. Skippers use it to report voyage and cargo data to the waterway manager and port authorities. It is free to use, and reports made via BICS satisfy the electronic reporting obligation. There is an installable version and an online variant, BICS Portal.
According to Rijkswaterstaat, an electronic reporting obligation has applied since 1 December 2021 to all vessels covered by Article 12.01 of the Rhine Navigation Police Regulations. Container vessels were already required to report earlier, and tankers since 1 December 2018. The details are set out in that article and in the Regeling communicatie en afmetingen rijksbinnenwateren (the Dutch regulation on communication and dimensions in national inland waters).
Yes. According to Rijkswaterstaat, BICS has a standardised interface that allows data from other applications to be shared automatically, such as from shippers' stowage programs. For more information on external applications, Rijkswaterstaat refers to the Bureau Telematica Binnenvaart.
Directive (EU) 2025/2482 focuses RIS on the inland waterways of the trans-European transport network and has the member states jointly set up a European RIS environment, a central platform with integrations to other modes of transport. Member states must transpose the directive by 2 January 2029 at the latest.
No. In healthcare, RIS stands for radiology information system. This page is about River Information Services for inland shipping. We have a separate page for software around a radiology information system.
For shipping companies and charterers with multiple vessels, for shippers and terminals that share cargo or arrival data, and for software suppliers in inland shipping. If you sail a single vessel and report yourself, BICS alone is often enough.
Enter voyage and cargo data just once?
Tell us where your voyage, cargo and vessel data currently lives and how you report. We'll show you how a RIS integration connects it to BICS and AIS.