Every defect on the drawing, with photo and measurement Repairs recorded per location A report your client understands

Custom concrete repair reporting software

Appfront builds software for concrete repair companies, inspectors and consultancies that inspect, repair and report on damage to concrete structures: every defect location on the drawing with photos and measurements such as cover depth and carbonation depth, a repair proposal per location, the execution with the materials used and the checks carried out, and a report for the client showing what was found, what has been done and what remains. So inspection, repair and report all refer to the same locations, and nobody has to hunt for photos to produce a report.

What is concrete repair reporting software?

Concrete ages. Reinforcement rusts through carbonation or chloride, concrete spalls, cracks keep growing. For a gallery-access flat, a car park, a bridge or a quay wall, repair starts with an inspection: where is the damage, how bad is it, and what is the cause. Repair per location follows, then a report for the client. Concrete repair reporting software records all of this per location, from inspection through to handover.

In many companies, an inspector takes photos with a phone, writes measurements on a drawing, and types up a report at the office with photos that have to be found and numbered. The repair crew gets a list of locations that doesn't always match the drawing. What was done at each location, and with which material, is reconstructed after the fact. And when the client asks about a specific spot, the searching begins.

We build custom software because the reporting has to fit your work: which structures you inspect and repair, which measurements you take, which repair methods and materials you use, which standards and guidelines your clients prescribe, and what your reports should look like. A generic inspection app knows questionnaires; locations on a drawing with measurements and a repair method per spot is something it doesn't.

Defects on the drawing

Every defect location as a point or area on the drawing, with type of damage, photos and measurements, recorded on the scaffold.

Repair per location

For each location, the repair proposal, the execution with materials and batch numbers, and the check after repair.

Reports built from the data

Inspection and repair reports in your house style, compiled from what has been recorded per location, with photos in the right place.

How we build your concrete repair reporting software

We start with a recent project: how it was inspected, how the repair crew received the locations, and how much time the report took.

1
Mapping your way of working

Your objects, measurements, repair methods and materials, client guidelines, and your reports.

2
Inspection on the drawing

Damage locations on the drawing with type, photos and measurements, on a tablet, even without signal.

3
Repair and verification

A repair proposal per location, execution with materials and batches, and the check after repair.

4
Report and integrations

Inspection and repair reports, integration with estimating and project administration, and ongoing management afterwards.

What concrete repair reporting software actually does

The components below appear at almost every concrete repair company. Which ones you need depends on your objects and clients.

Drawings

Floor plans and elevations per object, on which locations are marked.

Damage locations

Type of damage, dimensions, photos and severity per location on the drawing.

Assessments

Cover depth, carbonation depth, chloride content and other measurements per location.

Repair proposal

A method and quantity per location, as a basis for estimating and execution.

Delivery

What was done, with which material and batch number, and the check after repair.

Report

Inspection and repair reports in your own house style, per object or per phase.

Who we build concrete repair reporting software for

The software is intended for companies where inspection and reporting of concrete repair currently rely on loose photos and word processors.

Concrete repair companies

Inspection, repair and report all in one hand. The locations from inspection to handover are the core.

Inspection and advisory firms

Inspections and repair plans for clients. The measurements and the report matter most.

Car park managers

Periodic inspections of the same structure. What you need is the comparison over the years.

Bridge and quay wall managers

Large objects with many locations. The drawings and the repair planning are the core.

Not sure about a large project yet?

Test your idea first: a working prototype in 1 day

With OneDayBuild, we make your idea tangible in a single day for €1,150, so you know whether further development is worth the investment. Decide to go ahead with the full build? Then we deduct the cost in full.

View OneDayBuild →

Technology and integrations

This page is about the inspection and repair of concrete. For inspections in general, see our page on an inspection app, for foundations our page on foundation investigation reporting, and for coatings our page on an app for coating thickness measurement. You can read about our approach at building custom software.

Drawings per object Locations on the drawing Photos per location Cover depth and carbonation depth Chloride content Repair proposal per location Materials and batch numbers Works without signal Reports in your own house style Integration with estimating

Why Appfront for your concrete repair reporting software?

A concrete repair report is only useful if every photo belongs to a specific spot. That is what we build on: damage on the drawing, repair per location, and a report generated from the data.

No more hunting for photos

Photos belong to a location on the drawing. The report places them in the right spot.

Execution in the same place

Execution works with the same locations as the inspection. Nothing is skipped or done twice.

Evidence per location

What was done, and with which material, is on record. A question from the client is answered quickly.

Security and privacy in concrete repair reporting software

The software contains drawings, inspection data and reports for your clients' objects, which is confidential information. Access is set up per role: the inspector sees their own projects, and the client sees only their own reports if you give them access.

The software works on the scaffolding without signal and synchronises as soon as there is a connection. The data is stored in a European data centre, with encrypted storage and daily backups.

Frequently asked questions about concrete repair reporting software

Questions that concrete repair companies and inspectors ask before getting started.

It records the damage locations on the drawing for each object with photos and measurements, creates a repair proposal per location, registers execution with materials and checks, and produces inspection and repair reports in your house style.

The measurements you take, such as concrete cover, carbonation depth and chloride content, per location. Which ones you use and how, we define in the first step.

Yes. Locations, photos and measurements are stored on the tablet and synchronised as soon as there is a connection.

The software records what your clients' guidelines require, such as the data per location and the checks after repair. Concrete repair is governed by, among others, the NEN-EN 1504 series and industry standards; which ones apply to your work is something you determine with your client or certifying body.

Yes. For periodic inspections of the same structure, earlier damage and repairs appear on the same drawing, so you can see what has been added.

Yes. Repair proposals with method and quantity per location can be passed to your estimating system, so the budget follows from the inspection.

Check that first. A general inspection app is enough for simple checklists. Custom software makes sense when locations on drawings, measurements and repairs per location are the core, and when the report needs your own layout.

Inspection, repair and report across the same locations?

Tell us which structures you inspect and repair, which measurements you take and how you currently report. We'll show you what the drawing, the locations and the report look like.

Edit content